SA Centrifugal Pump

Open impeller design

Semi-open, non clogging high efficiency impeller allowing the pump to operate on dirty water.

Replaceable wear plate

To keep the pump at max. capacity even after working with abrasive fluids for a long time, the tolerance between impeller and wear plate may be adjusted by way of shims behind the replaceable wear plate.

Mechanical shaft seal

A reliable, spring-loaded, mechanical shaft seal ensures rapid suction, and shaft wear and stuffing box tightening are avoided.

Check valve mounted at a high level

The pump check valve is mounted well above the impeller inlet. Consequently, the pump will not – in case of a check valve leakage – lose the priming water which would result in a loss of priming ability.

Heavy bearing design

Heavy shaft and bearing design provide long life even in case of belt drive.